Dependable leadwork from Tradesmasters
Junctions assessed carefully
We check how the flashing meets the roof so the repair suits the exact detail.
Not just a surface patch
We deal with the failed section properly instead of hiding the leak for a short time.
Linked roof faults considered
We look at nearby chimney and roof issues that may be feeding water into the joint.
Why leadwork is often the hidden leak point
Leadwork sits at the roof junctions where water is most likely to test the detailing, such as around chimneys, valleys, abutments and changes in roof level. At Tradesmasters, we deal with domestic lead flashing issues by identifying whether the leak is coming from split, lifted or poorly seated lead, or from a nearby roof fault that is sending water toward the joint. From our Clydebank base, we help homeowners make sense of damp patches that seem to return again and again because the real problem sits in the flashing rather than the main roof covering.
Repairing the junction instead of guessing
With Tradesmasters, leadwork starts with inspection of the affected area and the roof type around it. We look at whether the issue lies in a failed joint, movement in the flashing, poor fixing or wear where the lead meets a chimney or wall. We then repair or renew the section as needed and make sure the detail sheds water properly into the roof covering and away to the guttering. Because leadwork often overlaps with chimney repairs, roof repairs and full replacements, we can address the wider problem rather than leaving part of the leak path untreated.
Frequently asked questions
What does roof leadwork actually do?
Leadwork helps seal the points where water is most likely to get in, such as chimneys, abutments and valleys. If flashing lifts, splits or has poor detailing, rain can track into the roof and show as stains or damp inside the house.
How do you know if flashing is the real problem?
We inspect the roof junction itself rather than guessing from the room below. If the leak sits around a chimney base, wall abutment or valley, damaged flashing or a failed lead joint is often the cause and can then be repaired properly.
Can leadwork be done during other roofing jobs?
Yes. Lead repairs and renewals are often part of roof repairs, chimney work and full roof replacements. Including the detail at the same time helps the whole area shed water correctly instead of treating only the most visible symptom.